File "warpboot.txt"
Path: /os2/info/tips/warpboot.txt
File size: 6.61 KB
MIME-type: text/plain
Charset: utf-8
Morton F. Kaplon CIS:73457,437 Thu 12-22-94
CREATE a Single BOOT Floppy for WARP 3.0
One Disk Boot for WARP 3.0 for system Using FAT and Non-Micro Bus
The example below uses 4OS2 as the Command Processor. If Use
CMD.EXE uses even less space.
Options given for Micro Channel and HPFS system.
Volume in drive A is unlabeled Serial number is E24D:2414
Directory of a:\*.*
<-------------- Comment -------------->
<DIR> 0 ____D 4os2
<DIR> 0 ____D os2
1,330 0 ___A_ config.sys
25,610 0 ___A_ country.sys
1,074 0 ___A_ dev002.msg
1,099 0 _HSA_ os2boot
555,972 0 _HSA_ os2krnl
30,208 0 _HSA_ os2ldr
8,366 0 _HSA_ os2ldr.msg
19,358 0 _HSA_ os2logo
89 0 _HSA_ os2ver
39,472 0 _HSA_ sysinstx.com Optional Use to Create bootable disks
268 0 _HSA_ wp root. sf
682,846 bytes in 11 files and 2 dirs 687,104 bytes allocated
46,080 bytes free
Volume in drive A is unlabeled Serial number is E24D:2414
Directory of a:\os2\*.*
<-------------- Comment -------------->
<DIR> 0 ____D .
<DIR> 0 ____D ..
<DIR> 0 ____D dll
17,820 0 ___A_ aha174x.add MY SCSI-replace with yours if needed
41,795 0 ___A_ cdfs.ifs Optional For CD ROM
68,656 0 ___A_ chkdsk.com
3,735 0 ___A_ clock01.sys If Micro Channel use clock02.sys
459 0 ___A_ config.sys
28,435 0 ___A_ ftdvr.sys Optional Driver for TAPE System
30,994 0 ___A_ ibm1flpy.add
9,860 0 ___A_ ibmint13.i13
5,548 0 ___A_ ibmkbd.sys
27,989 0 ___A_ kbdbase.sys
16,436 0 ___A_ optical.sys Optional M-O driver
24,236 0 ___A_ os2cdrom.dmd Optional CD ROM driver
33,562 0 ___A_ os2dasd.dmd
9,692 0 ___A_ os2scsi.dmd If Micro Channel use ibm2scsi.add
10,910 0 ___A_ print01.sys If Micro Channel use print02.sys
27,084 0 ___A_ resource.sys
9,461 0 ___A_ screen01.sys If Micro Channel use screen02.sys
10,820 0 ___A_ tedit.exe Optional tiny Editor
14,596 0 ___A_ tedit.hlp Optional tiny Editor
IF use HPFS need to have
135,746 0 ___A_ hpfs.ifs
392,088 bytes in 19 files and 3 dirs 398,336 bytes allocated
46,080 bytes free
Volume in drive A is unlabeled Serial number is E24D:2414
Directory of a:\os2\dll\*.*
<-------------- Comment --------------->
<DIR> 0 ____D .
<DIR> 0 ____D ..
512 0 ___A_ bkscalls.dll
6,176 0 ___A_ bmcompr.dll Optional - Used for Tape Drive
512 0 ___A_ bmscalls.dll
7,999 0 ___A_ bvhinit.dll
512 0 ___A_ bvscalls.dll
137,084 0 ___A_ doscall1.dll
1,024 0 ___A_ kbdcalls.dll
1,024 0 ___A_ moucalls.dll
512 0 ___A_ msg.dll
1,024 0 ___A_ nampipes.dll
512 0 ___A_ nls.dll
25,504 0 ___A_ npxemltr.dll
512 0 ___A_ os2char.dll
1,024 0 ___A_ quecalls.dll
1,536 0 ___A_ sesmgr.dll
2,048 0 ___A_ viocalls.dll
187,515 bytes in 16 files and 2 dirs 189,440 bytes allocated
46,080 bytes free
Volume in drive A is unlabeled Serial number is E24D:2414
Directory of a:\4os2\*.*
<--------------- Comment ---------------->
<DIR> 0 ____D . Optional no 4os2 subdirectory
<DIR> 0 ____D .. Optional no 4os2 subdirectory
134,880 0 ___A_ 4os2.exe Optional use: 90,624 0 ___A_ cmd.exe
431 0 ___A_ 4os2.ini Optional 0
30 0 ___A_ 4start.cmd Optional 0
1,434 0 ___A_ alias.lst Optional 0
136,775 bytes in 4 files and 2 dirs 138,752 bytes allocated
If use cmd.exe 136,775 -> 90,624 Bytes, Gain of 46,151 bytes
46,080 bytes free
<<<<<<<<<<<<< Below is contents of config.sys on A: floppy >>>>>>>>>>>>>>>
REM STart of config.sys
BUFFERS=30
IOPL=YES
MEMMAN=NOSWAP
PAUSEONERROR=YES
DISKCACHE=64,LW
PROTECTONLY=YES
REM *** OS/2 Command Processor
REM SET OS2_SHELL=CMD.EXE
REM PROTSHELL=CMD.EXE
REM *** OS/2 Command Processor
REM *** 4OS2 16 bit Command Processor
SET OS2_SHELL=A:\4OS2\4OS2.EXE
PROTSHELL=A:4OS2\4OS2.EXE
SET COMSPEC=A:\4OS2\4OS2.EXE
SET PROMPT=[4OS2$p]
REM *** 4OS2 16 bit Command Processor
LIBPATH=.;A\:;A:\OS2\DLL
SET PATH=A:\;A:\OS2;A:\4OS2
SET DPATH=A:\;A:\OS2;A:\4OS2
SET KEYS=ON
Rem *** Driver for Parallel Port for Optical
REM BASEDEV=EPSA.ADD /T
Rem *** Driver for Parallel Port for Optical
BASEDEV=AHA174X.ADD /V REM may need to change for your system
BASEDEV=OS2SCSI.DMD
BASEDEV=OS2DASD.DMD
BASEDEV=IBM1FLPY.ADD
BASEDEV=PRINT01.SYS REM change to PRINT01.SYS for Micro Channel
BASEDEV=IBMKBD.SYS
REM *** Driver for Optical Off SCSI Optional for Optical drive
DEVICE=A:\OS2\OPTICAL.SYS
REM *** Driver for Optical Off SCSI
rem *** Files for use of CDROM and Hard Disk via Adaptec Optional
DEVICE=A:\OS2\OS2CDROM.DMD /Q
IFS=A:\OS2\CDFS.IFS /Q
rem *** Files for use of CDROM and Hard Disk via Adaptec
Rem *** driver for Tape Drive Optional
DEVICE=A:\OS2\FTDVR.SYS
Rem *** driver for Tape Drive
REM OPTIONAL: If use HPFS need to have statement
IFS=A:\OS2\HPFS.IFS /whatever options you use
REM End of Config.sys
There are 203,816 bytes listed as Optional (including using cmd.exe)
so there is readily sufficient space to install the HPFS by deleting
some of those. There would still be room to add back in the Tiny
Editor plus some more.
TO CREATE the BOOTABLE Floppy
SYSINSTX,COM can be found on the WARP Install Diskette
Copy it to your existing WARP \OS2 directory and with a formatted
floppy in A: give the command
sysinstx A:
This will make the floppy a bootable disk - it transfers system files.
You can then use attrib -sh *.* on your C: root directory to make
the other files available and copy those (as listed above) to the
A: root drive. Then use attrib +sh on each of those files to make it
hidden again.
*****
I originally used the Create Utility option ti create the 3 floppy disks
that it does. I noted that only disk 1 and 2 are required for the boot
process. I also noted that this procedure did not allow the inclusion of
the additional drivers I needed (tape,optical,CD ROM) so using the
files included on these 2 drives and eliminating the superfluous ones
I arrived at the above combinations.